RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050247 POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function) J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM(w/o Jam Protection Function)  Front Passenger Side Power Window does not Operate with Front Passenger Side Power Window Switch  


DESCRIPTION

When the ignition switch is ON, the front power window regulator motor assembly RH is operated by the power window regulator switch assembly.

WIRING DIAGRAM

B341201E03
0.146,0.469 1.979,0.667 1.833,0.198 10 from POWER Relay 2.26,0.656 3.49,0.854 1.229,0.198 10 P/W MAIN 0.188,2.479 0.5,2.677 0.313,0.198 10 I2 0.167,2.667 2.073,3.031 1.906,0.365 10 Front Power Window Regulator Motor Assembly RH 2.365,2.49 2.677,2.688 0.313,0.198 10 I4 2.344,2.698 3.906,3.063 1.563,0.365 10 Power Window Regulator Switch Assembly 4.938,2.698 6.469,2.896 1.531,0.198 10 J5 4.938,2.885 6.938,3.229 2,0.344 10 Power Window Regulator Master Switch Assembly 3.354,1.667 3.51,1.865 0.156,0.198 10 B 3.438,1.802 3.75,2 0.313,0.198 10 SU 3.427,2.167 3.74,2.365 0.313,0.198 10 SD 1.531,1.677 1.688,1.875 0.156,0.198 10 2 1.313,1.885 1.469,2.083 0.156,0.198 10 U 1.313,2.26 1.469,2.458 0.156,0.198 10 D 1.531,2.042 1.688,2.24 0.156,0.198 10 1 2.708,1.677 2.865,1.875 0.156,0.198 10 4 2.729,2.052 2.885,2.25 0.156,0.198 10 1 2.917,1.677 3.073,1.875 0.156,0.198 10 U 2.906,2.063 3.063,2.26 0.156,0.198 10 D 3.354,1.458 3.51,1.656 0.156,0.198 10 3 3.698,1.781 4.01,1.979 0.313,0.198 10 5 3.698,2.188 4.01,2.385 0.313,0.198 10 2 5.094,1.875 5.406,2.073 0.313,0.198 10 U 5.104,2.083 5.417,2.281 0.313,0.198 10 D 4.833,1.771 6.365,1.969 1.531,0.198 10 16 4.844,2.167 6.375,2.365 1.531,0.198 10 15

CAUTION / NOTICE / HINT

NOTICE:
·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

Check that the window lock switch is off before performing the following procedure.



PROCEDURE

1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
a.

Remove the power window regulator switch assembly.

Click hereVehicle Exterior>WINDOW / GLASS>FRONT PASSENGER SIDE POWER WINDOW SWITCH>REMOVAL


b.

Inspect the power window regulator switch assembly.

Click hereVehicle Exterior>WINDOW / GLASS>FRONT PASSENGER SIDE POWER WINDOW SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

2.INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

NG

REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY

Click hereVehicle Exterior>WINDOW / GLASS>FRONT PASSENGER SIDE POWER WINDOW SWITCH>REMOVAL


2.INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
a.

Remove the front power window regulator motor assembly RH.

Click hereVehicle Exterior>WINDOW / GLASS>FRONT PASSENGER SIDE POWER WINDOW SWITCH>REMOVAL


b.

Inspect the front power window regulator motor assembly RH.

Click hereVehicle Exterior>WINDOW / GLASS>FRONT PASSENGER SIDE POWER WINDOW SWITCH>INSPECTION


Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR SWITCH ASSEMBLY - BATTERY)

NG

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW REGULATOR MOTOR(for Front Door)>REMOVAL


3.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR SWITCH ASSEMBLY - BATTERY)
a.
B276367C01
0.188,0.906 0.458,1.208 0.271,0.302 1.688,1.677 1.677,1.292 true 0.083,0.104 0.396,0.302 0.313,0.198 10 *a 0.271,0.99 0.583,1.188 0.313,0.198 10 I4 1.656,1.688 1.813,1.885 0.156,0.198 10 B
*a Front view of wire harness connector
(to Power Window Regulator Switch Assembly)


Disconnect the power window regulator switch assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
I4-3 (B) - Body ground Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR SWITCH ASSEMBLY - FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR SWITCH ASSEMBLY - FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH)
a.

Disconnect the I4 power window regulator switch assembly connector.


b.

Disconnect the I2 front power window regulator motor assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I4-4 (U) - I2-2 (U) Always Below 1 Ω
I4-1 (D) - I2-1 (D) Always Below 1 Ω
I4-4 (U) or I2-2 (U) - Body ground Always 10 kΩ or higher
I4-1 (D) or I2-1 (D) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - POWER WINDOW REGULATOR SWITCH ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - POWER WINDOW REGULATOR SWITCH ASSEMBLY)
a.

Disconnect the J5 power window regulator master switch assembly connector.


b.

Disconnect the I4 power window regulator switch assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
J5-16 (U) - I4-5 (SU) Always Below 1 Ω
J5-15 (D) - I4-2 (SD) Always Below 1 Ω
J5-16 (U) or I4-5 (SU) - Body ground Always 10 kΩ or higher
J5-15 (D) or I4-2 (SD) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

Click hereVehicle Exterior>WINDOW / GLASS>POWER WINDOW MASTER SWITCH>REMOVAL


NG

REPAIR OR REPLACE HARNESS OR CONNECTOR